王覺寬 教授 簡介

職稱:國立成功大學航空太空工程研究所名譽教授
辦公室:5870A
電話:886-6-2757575 ext. 63686
傳真:+886-6-2389940

學歷

美國喬治亞理工學院航太工程研究所 博士 1985
國立成功大學機械工程研究所 碩士 1976
國立成功大學機械工程系 學士 1974

經歷

美國加州大學 機械系 Visiting Profess 1986/07至1986/09
國立成功大學 航太系 副教授 1985/04至1994/08
喬治亞理工學院 燃燒實驗室 Research assistant 1980/09至1985/04
國立成功大學 機械系 講師 1978/09至1980/08
三陽工業公司 研究發展部 研究工程師 1978/05至1978/09

專長及研究領域

微噴霧製程與噴霧造粒技術 , 金屬粉末造粒技術 , 微機電技術 , 奈米粉末技術 , 能源科技 , 工程聲學 , 污染防治 , 航空工程 , 機械熱流 , 燃燒診測 , 燃燒學 ,

榮譽及獎勵

2009成大工學院優良導師
2009成大航太系優良導師
2008航太學刊最佳論文獎
產學優良獎--
2005年國科會產學優良獎
教學優良獎
2001航太系教學優良教師
2004航太系教學優良教師
2005航太系教學優良教師
2006航太系教學優良教師
2007工學院教學特優教師
2007成功大學教學優良教師
研究計畫績效獎
2001年研究計畫績效獎
2002年研究計畫績效獎
2003年研究計畫績效獎
服務績優獎
1997中華民國燃燒學會服務績優獎
1. , Spray Performances and Cryogenic Characteristics of CO2 Snow under Cryosurgery Guided by Endoscopic , Journal of Mechanics , 2013 (SCI) 摘要
2. , Agglomeration processes and mechanisms of CO2 snow inside a tube , Journal of Aerosol Science and Technology , 2013 , Vol.48, No.2 , pp.228-237 (SCI) 相關聯結
3. , Effects of superheat on characteristics of flashing spray and snow particles produced by expanding liquid carbon dioxide , Journal of Aerosol Science , 2013 , Vol.61 , pp.27-35 (SCI) 相關聯結
4. , Mechanism and Performance of a CO2 Snow Jet in Co-axial Type Injection Systems , Journal of Aeronautics, Astronautics and Aviation , 2013 , Series A, Vol.45, No.1 (EI) 相關聯結
5. , Production of Carbon Dioxide Snow by Flash-Atomization for Material cleaning Process , Advanced Materials Research , 2012 , Vols 569 , pp.282-285 (EI) 相關聯結
6. , Performance of Twin-fluid Atomizers with Flow Impingement , Journal of Aeronautics, Astronautics and Aviation , 2012 , Series A, Vol.44, No.1 , pp.059-066 (EI) 相關聯結
7. , Effects of Bypass Flow on CO2 Snow Formation for Cryogenic Application , Journal of Aeronautics, Astronautics and Aviation, , 2012 , Series A, Vol.44 (EI) 相關聯結
8. , Atomization Mechanism and Performance of Multiple Micro-Jets with Resonance Effect , Journal of Aeronautics, Astronautics and Aviation , 2011 , Series B, Vol.43 , pp065-072 (EI) 相關聯結
9. , Performance of Micro-Injector with Inner Block for Drop on Demand Application , Modern Physics Letters B , 2010 , ,Vol. 24, No. 13 , pp.1373−1376 (SCI) 相關聯結
10. , Evolution of needle-free micro-injection to the soft solid material for medical delivery system , Modern Physics Letters B (MPLB) , 2010 (SCI) 摘要 相關聯結
11. , Production of Metal Powder with Impingement of Molten Spray on Different Geometry of Substrates , Powder Metallurgy: for Automotive and Engineering Industries , 2009 (SCI) 摘要
12. , PIV measurements of turbulent flow in planar mixing layer , Experimental Thermal and Fluid Science , 2009 (SCI) 摘要
13. , Dynamics of Mixing Processes in Micro-mixer with Curved Bluff-body Structure under External Excitation , Modern Physics Letters B (MPLB) , 2009 (SCI) 摘要 相關聯結
14. , MECHANISMS AND CHARACTERISTICS OF SPRAY FORMATION WITH FLOW FOCUSING IN A NOVEL AIRASSIST MICRO-ATOMIZER , Modern Physics Letters B (MPLB) , 2009 (SCI) 摘要 相關聯結
15. , Characterization of the Pulsed Needle-Free Micro-Injector in the Medical Delivery System , Modern Physics Letters B , 2009 (SCI) 摘要
16. , Dynamics of Mixing Processes in Micro-mixer with Curved Bluff-body Structure under External Excitation , Modern Physics Letters B , 2009 (SCI) 摘要
17. , Mechanisms and Characteristics of Spray Formation with Flow Focusing in a New Air-Assist Micro-Atomizer , Modern Physics Letters B , 2009 (SCI) 摘要
18. , Atomization Performance of Internal-Impinging Type Micro-Atomizer with Flow Focusing Mechanism , Journal of Aeronautics, Astronautics and Aviation , 2008 (SCI)
19. , Effects of Substrate Geometry on Performance of Twin-Fluid Atomizer in Metal Powder Production , Materials Science Forum , 2008 (SCI) 摘要
20. , Performance of Twin-Fluid Micro-Atomizer with Internal Mixing Mechanisms , Journal of Aeronautics, Astronautics and Aviation , 2007 (SCI) 摘要
21. , Production of Ultrafine Metal Powder with Gas Atomization Processes , Journal of Ilass-Korea , 2006 (SCI) 摘要
22. , Atomization Characteristics of Molten Metal in a Linear Atomizer with Low Aspect Ratio , J. CSME , 2006 (SCI) 摘要
23. , Combination of Spray Forming and Metal Powder Productions by the Internal Mixing Atomizer with a Substrate , Materials Science Forum , 2006 (SCI)
24. Muh-Rong Wang, Tzong-Shyng Leu ,Yi-Jun Shen, Wei-Lung Weng , Performance of Micro-Injector with Inner Block for Drop on Demand Application, , Modern Physics Letters B, , Vol. 24, No. 13 (2010) , pp.1373−1376 (SCI)
25. Muh-Rong Wang, Tzong-Shyng Leu ,Yi-Jun Shen, Wei-Lung Weng , Performance of Micro-Injector with Inner Block for Drop on Demand Application, , Modern Physics Letters B, , Vol. 24, No. 13 (2010) , pp.1373−1376 (SCI)
1. [102] 功能性奈米材料量產技術之研發
(102/08/01~ 103/07/31)
2. [102] 高分子材料窄化型噴霧技術應用在奈米薄膜噴塗製程之研究
國科會
3. [102] 藥物釋放栓塞微球粒治療肝癌計畫-子計畫三-藥物釋放栓塞微球粒設計與製造
成大醫院 (102/01/01~ 102/12/31)
4. [102] 太陽能板吸收膜研發
經濟部 (102/01/01~ 102/12/31)
5. [100] 熔噴纖維在常溫空氣動力牽伸之噴嘴設計與雛型研發
紡研所 (101/03/01~ 101/12/31)
6. [100] 應用於內視鏡治療術之醫療器材研發 計畫
成功大學 (101/03/01~ 101/12/31)
7. [100] 藥物釋放微球經由動脈栓塞腫瘤—產品設計、生產及小動物模型導航性研究
成功大學 (100/08/01~ 100/12/31)
8. [100] 醫療器材跨領域萌芽創新計劃
國科會 (100/03/01~ 101/02/28)
9. [100] 應用於內視鏡治療術之醫療器材研發計畫
成功大學 (100/08/01~ 100/12/31)
10. [100] 同軸型二氧化碳雪花噴霧特性及生成機制研究 (NSC100-2221-E-006-113-MY2)
國科會 (100/08/01~ 102/07/31)
11. [99] 具超音速粒子衝擊機構之多級式乾式超微細奈米研粉系統研發(NSC99-2622-E-006-038-CC3)
國科會、稷富國際科技有限公司 (99.11~ 100.10)
12. [99] 微型渦輪引擎研製
(98.1~98.12) 中文摘要 英文摘要
13. [99] 空氣動力式霧化法應用於高溫融熔金屬之霧化研究
(98.8~99.7) 中文摘要 英文摘要
14. [99] 磁熱療術應用於腫瘤之局部治療—儀器系統開發、疾病適應症與治療應用技術之研究 子計畫四:電磁熱療系統應用輔具系列之研發
(98.8~99.7) 中文摘要 英文摘要
15. [99] 三維噴印核心技術之研究發展計畫第二期計畫
(97.9~98.8) 中文摘要 英文摘要
16. [96] 雙流體內衝擊式微型霧化系統之研製及霧化機構研究
國科會 (96.8.1-97.7.31)
17. [95] 雙流體內衝擊式微型霧化系統之研製及霧化機構研究(1/2)
國科會 (95.8.1-97.7.31)
18. [95] 提升產業技術及人才培育研究計畫--空蝕共振在壓力式霧化裝置之應用
國科會 翰寧公司 (95.5.1-96.4.30) 中文摘要
19. [94] 提升產業技術及人才培育研究計畫--具有外加共振腔之高壓霧化裝置研究
國科會 (94.5.1-95.4.30)
20. [94] 雙流體內混式微型霧化系統之研製之及霧化機構研究
國科會 (94.8.1-95.7.31)
21. [93] 具奇點結構之漩渦式霧化器參數研究
國科會 (93.8.1-94.7.31)
22. [93] 提升產業技術及人才培育研究計畫--田口式實驗法在多噴頭霧化技術之最佳化研究
國科會 (93.5.1-94.4.30)
23. [92] 提升產業技術及人才培育研究計畫--高效率多噴霧化技術在降低噴霧粒度比之效應
國科會 翰寧公司 (92.6.1-93.5.31)
24. [92] 產學合作計畫:超微粒金屬焊料製造及分級技術研究(3/3)
國科會 恆碩公司 (92.8.1-93.7.31)
25. [91] 提升產業技術及人才培育研究計畫--產業用大流量超聲波噴嘴技術之研發
國科會 翰寧公司 (91.6.1-92.5.31)
26. [90] 超微粒金屬焊料製造及分級技術研究(1/3)產學合作計畫
國科會 恆碩公司 (90.8.1-91.7.31)
27. [90] 噴霧在哈特曼共振器中之霧化機構研究
國科會 (90.8.1-91.7.31)
1.Carvalho, J.A., Wang, M.R., Miller,N., Daniel, B.R., and Zinn, B.T., 1984, "Controlling Mechanisms and Performance of Coal Burning Rijke Type Pulsating Combustors," Proceeding of the 20th Symposium(International) on Combustion, pp. 2011-2017. (SCI)

2.Wang, M.R. and Zinn, B.T., 1987, "Performance Characteristics of a Prototype Rijke Type Pulsating Combustor," Journal of Chinese Society of Mechanical Engineering, Vol. 8, No. 5, pp. 339-347. (EI)

3.Sheu, S.S., Hsiao, F.B. and Wang, M.R., 1987, "Effects of Acoustic Excitations on Coherent Structures in a Plane Jet," Trans. of the Aeronautical and Astronautical Society of ROC, pp.17-34. (EI)

4.Wang, M.R., and Zinn, B.T., 1988, "Study on Sound Induced Fluidization in a Coal-Fired Pulsating Combustor," Journal of National Cheng Kung University, Vol. 24, Sci., Eng. & Med. Section, pp. 23-35.

5.Wang, M.R. Lin, S.D., and Hsiao, F.B., 1989, "Analysis on Unstable Waves in the Plane Jet," Journal of Chinese Society of Mechanical Engineering, Vol. 11, No. 5, pp. 393-403. (EI)

6.Wang, M.R., Chang, K.C. and Sheu, K.C., 1990, "Sulfur Removal from Coal-Fired Rijke-Type Pulsating Combustor by Burning with Calcium Carbonate Particles," JSME International Journal, Series II, Vol. 33, No. 2, pp. 384-388. (SCI)

7.Wang, M.R. and Chang, K.C., 1991, "Study on Reduction of and Emissions in a Pulsating Combustor Burning Petroleum Coke," The International Journal of Energy, Vol. 16, No. 5, pp. 849-858. (SCI)

8.Wu, G.Y., Hwang, K.J., Hsu, K.C., Han, H.W. and Wang, M.R., 1991, "The Effects of Swirl Number on the Spray Flames in a Swirl-Stabilized Can Combustor," Journal of the Chinese Society of Mechanical Engineers, Vol. 12, No. 1, pp. 102-108. (EI)

9.Wang, M.R., Chen, W.M., and Lai, W.H., 1991, "Dynamic Characteristics of Bluff-Body Flow Under Acoustic Excitations," Trans. of the Aeronautical and Astronautical Society of ROC, Vol. 23, No. 1, pp. 93-102. (EI)

10.Wang, M.R., Lin, Y.T. and Hsiao, F.B., 1992, "Experimental Analysis of Dynamics of a Circular Jet under Dual-Mode Dual-Frequency Excitations," Journal of the Chinese Society of Mechanical Engineers, Vol. 13, No. 5, pp. 401-411. (EI)

11.Chang, K.C., Wang, M.R., Wu, W.J. and Hong, C.H., 1993, "Experimental and Theoretical Study on Hollow-Cone Spray," AIAA Journal of Propulsion and Power, Vol. 9, No. 1, pp. 28-34, January-February. (SCI)

12.Wang, M.R., Chang, K.C. and Chang, W.C., 1993, "Parametric Study on Reduction of SO2 Emissions in a Coal-Fired Pulsating Combustor," Combust. Sci. and Tech., Vol. 90, 1-4, pp. 253-266. (SCI)

13. Chang, K.C., Wang, M.R., Wu, W.J. and Liu, Y.C., 1993, "Theoretical and Experimental Study on Two-Phase Structure of Planar Mixing Layer," AIAA Journal, Vol. 31, No. 1, pp. 68-74. (SCI)

14.Wang, M.R, Lai, W.H., Wang, T.K. and Chen, W.M., 1993, "Characteristics of the Flat Plate Flameholders with Angle of Attack," Trans. of the Aeronautical and Astronautical Society of ROC, Vol. 25, No. 2, pp.109-114. (EI)

15.McDonell, V.G., Samuelsen, G.S., Wang, M.R., Hong, C.H., and Lai, W.H., 1994, May-June, "Interlaboratory Comparison of Phase Doppler Measurements in a Research Simplex Atomizer Spray," AIAA Journal of Propulsion and Power, Vol.10, No.3, pp.402-409. (SCI)

16.Wang, M.R., Huang, D.Y. and Liu, Y.C., 1994, "Droplets Dynamics Near the Wall in a Vertical Rectangular Duct," Transactions of the ASME, Journal of Fluids Engineering, June, Vol. 116, pp.349-353. (SCI)

17.Wang, M.R., Huang, D.Y., 1994, November, "Droplet Dispersion and Ejection Processes in Two-Phase Boundary Layer," AIAA Journal, Vol. 32, No. 11, pp.2217-2223. (SCI)

18.Wang, M.R., Lai, W.H., Wang, T.K. and Chen, W.M., 1994, "Performance Characteristics of Controllable Flat-Plate Flameholders," International Journal of Turbo & Jet Engines, Vol. 11, No. 2-3, pp. 219-227. (SCI)

19.Wang, M.R., Jen, K.D., Kuo, C.J. and Lai, W.H., 1994, "Flameholding Characteristics of Twin-Plate Flameholders, "International Journal of Turbo & Jet Engines, 11, 277-292. (SCI)

20.Wang, M.R., and Huang, D.Y., 1995, "Measurements of in the Mixing Layer Flow with Droplet Loading, "Atomization and Sprays / International Journal of the Institute of Liquid Atomization and Spray Systems, Vol.5, No. 3, pp.305-328. (SCI)

21.Wang, M.R., and Huang, D.Y., 1995, "Effects of Drop Loading on Turbulent Diffusivity in a Two-Phase Mixing Layer Flow, "Atomization and Sprays / International Journal of the Institute of Liquid Atomization and Spray Systems, Vol. 5, No. 3, pp.329-342. (SCI)

22.Wang, M.R., Jen, K.D., Shiue, Y.S. and Lai, W.H., 1995, "Fuel Injection Technique to Control the Flame Limits of a Twin-Plate Flameholder," International Journal of Turbo & Jet Engines, 12, 79-98. (SCI)

23.Lai, W.H., Yang, K.H., Hong, C.H. and Wang, M.R., 1996, "Droplet Transport in Simplex and Air-Assisted Sprays," Atomization and Sprays / International Journal of the Institute of Liquid Atomization and Spray System, Vol. 6, No. 1, pp. 27-49. (SCI)

24.Chang, K.C., Wu, W.J. and Wang, M.R., "Limitation of Stochastic Approach in Two-Phase Turbulent Flow Calculations," Atomization and Sprays. Vol. 6. pp.211-225, 1996. (SCI)

25.Wang, M.R., Sheu, M.S., Wang, C.K., and Lin, F.C., 1997 “Effects of Atomization Air with Air-Assist and Air-Blast Type Planar Injector,” Trans. of the Aeronautical and Astronautical Society of ROC, Vol. 29, No. 2, pp 185-193. (EI)

26.Lee, W.B., Chen, R.C., Chiou, W.K., Tien, T.C., Tsuei, Y.M., Hong, C.H., Chiu, H.H., Jiang, T.L., and Wang, M.R., 1997, “Research on the Deposit Elimination of Fuel Nozzle of GE MS7001E Engine,” Journal of Taipower’s Engineering, Vol. 589, Sept. pp 13-28.

27.Wang, M.R., Lin, F.C., Sheu, M.S., Wang, C.K., and Lin, F.C., 1999, “Control of Spray Angle in a Pressure Swirling Atomizer,” Trans. of the Aeronautical and Astronautical Society of ROC, Vol.31, No.2, pp.99-107. (EI)

28.Chang, K.C., Yang, J.C. and Wang, M.R., 2003, “On Grid-Averaged Lagrangian Equations for Dispersed-Phase Turbulence Kinetic Energy and Modulation Quantity in Dilute Two-Phase Flow,” AIAA Journal, Vol 41, No.7, pp.1292-1303.(SCI)

29.Wang, M.R., Lin, T.C., Yang, C.J., 2005, “Low Pressure Atomization Process of Molten Metal in A Linear Internal Mixing Atomizer,” Transactions of the Aeronautical and Astronautical Society of the Republic of China, Vol.37, No.3, pp. 269-274. (EI)

30.Wang, M.R., Lai, T.S., Lin, T.C., Sheu, M.S., Chiu, C.H., Yang, C.J., 2005, “Optimization of Metal Powder Production by Gas Atomization Processes With Internal-Mixing Mechanism,” Transactions of the Aeronautical and Astronautical Society of the Republic of China, Vol.37, No.2, pp153-162 (EI) (has been included in CSA Mechanical & Transportation Engineering Abstracts .)

31.Wang, M.R., Lin, T.C., Lai, T.S., 2005, “Atomization Performance of an Atomizer with Internal Impingement,” JSME International Journal, Series B, Vol. 48, No. 4, pp. 858-864, 2005 (SCI)

32.Lee, C. T., Chang, K. C., and Wang, M. R., (2005)“Measurements of Velocity Correlation Function in a Planar Mixing Layer,”Jets, Wakes and Separated Flows, eds. T. Shakouchi, F. Durst, and K. Toyoda, The Japan Society of Mechanical Engineers, Tokyo, Japan (JSME No. 05-201), pp.789-794.

33.Muh-Rong Wang, Pin-Jen Chen, Je-Rei Yang, Jin-Shen Chiu, Tien-Chu Lin and Teng-Sun Lai, ”Combination of Spray Forming and Metal Powder Productions by the Internal Mixing Atomizer with a Substrate,”Materials Science Forum, Vols.505~507, (January 2006) pp.1237-1242. (SCI)

34.Muh-Rong Wang, Cheng-Chan Kuo, Che-Jui Yang, Jin-Shen Chiu and Ming-Seng Sheu, ”Atomization Characteristics of Molten Metal in a Linear Atomizer with Low Aspect Ratio,” J. CSME, Vol.27, No.2, pp.159-164 (2006) (EI)

35.Muh-Rong Wang, ”Production of Ultrafine Metal Powder with Gas Atomization Processes,” Journal of Ilass-Korea, Vol.11, No.2, pp.59-68 (2006) (EI)

36.Muh-Rong Wang , K. H. Yang , T. S. Leu, C.J. Yang, “Performance of Twin-Fluid Micro-Atomizer with Internal Mixing Mechanisms,” Journal of Aeronautics, Astronautics and Aviation, Series A, Vol.39, No. 1, March 2007, pp9-18. (EI)

37.Muh-Rong Wang, Kun-He Yang, and C. J. Yang, “Atomization Performance of Internal-Impinging Type Micro-Atomizer with Flow Focusing Mechanism,” Journal of Aeronautics, Astronautics and Aviation, Series B, 2008 (EI)(Best paper award)

38.Muh-Rong Wang, Che-Jui Yang, Jian-Duen Huang, Tien-Chu Lin and Ming-Shen Sheu,” Effects of Substrate Geometry on Performance of Twin-Fluid Atomizer in Metal Powder Production,” Materials Science Forum, Vol.594, (2008) pp.138-149. (SCI)

39.Muh-Rong Wang, Yang-Sheng Huang,” Dynamics of Mixing Processes in Micro-mixer with Curved Bluff-body Structure under External Excitation,” Modern Physics Letters B, volume 23, issue 3, 30 January, 2009 (SCI)

40.Muh-Rong Wang, Kun-He Yang, Chun-Hsein Chiu and Che-Juey Yang,” Mechanisms and Characteristics of Spray Formation with Flow Focusing in a New Air-Assist Micro-Atomizer,” Modern Physics Letters B, volume 23, issue 3, 30 January, 2009 (SCI)

41.Muh-Rong Wang, Chun-Hsien Chiu,”Characterization of the Pulsed Needle-Free Micro-Injector in the Medical Delivery System,” Modern Physics Letters B, volume 23, issue 3, 30 January, 2009 (SCI)

42.Muh-Rong Wang, Che-Jui Yang, Jian-Duen Huang, 2009, “Production of Metal Powder with Impingement of Molten Spray on Different Geometry of Substrates,” Powder Metallurgy for Automoyive and Engineering Industries, Editor, P.Ramakrishnan, Narosa Publishing House, ISBN 978-81-7319-934-9, 2009, pp.99-112 (EI)

43.Chiuan-Ting Li, Keh-Chin Chang, Muh-Rong Wang, 2009, “PIV measurements of turbulent flow in planar mixing layer,”Experimental thermal and fluid science 33 (2009) 527-537(SCI)

44.Chiuan-Ting Li, Keh-Chin Chang* and Muh-Rong Wang, “Experimental Study on Evolution of Joint Velocity PDF in Planar Mixing Layer,” Submit to Experimental thermal and fluid science (SCI)

45.Muh-Rong Wang, Tzong-Shyng Leu ,Yi-Jun Shen, Wei-Lung Weng, “Performance of Micro-Injector with Inner Block for Drop on Demand Application,” Modern Physics Letters B, Vol. 24, No. 13 (2010) pp.1373−1376 (SCI)

46.Muh-Rong Wang, Chun-Hsien Chiu, Yang-Sheng Huang, Chien-Chih Huang and Li-Jay Cheng, “Evolution of Needle-Free Micro-Injection to the Soft Solid Material for Medical Delivery,” Modern Physics Letters B, Vol. 24, No. 13 (2010) 1393−1396 (SCI)

47.Muh-Rong Wang, Kun-He Yang, Ten.Chu. Lin, Tsung-Sing Leu, Che-Juey Yang, “Effects of Mixing Chamber Design on Atomization Performance in Internal-Impinging Micro-Atomizers,” submit to J. of Micomechanics and Microengineering. (SCI)

48.Muh-Rong Wang, Tien-Chu Lin, Kun-He Yang, “Mixing enhancement induced by the internal impingement in an air-assist atomizer,” Submitted to Experimental Thermal and Fluid Science

49.Muh-Rong Wang, Che-Jui Yang, Jian-Duen Huang and Ming-Shen Sheu, “Production of metal powder with impingement of melt on different geometry of substrates,” Submitted to Experimental Thermal and Fluid Science

50.Muh-Rong Wang, Che-Jui Yang, Tien-Chu Lin, Chun-Hsien Chiu and Kun-He Yang, “Effects of flow impingement on performance of twin-fluid atomizers with different configurations of substrate,” JSME International Journal, Series B

51.Muh-Rong Wang, Yang-Sheng Huang and Chun-Hsien Chiu, “Enhancement of Mixing Performance with Slits and Double Bluff-Body Structure in a Micro-Mixer,” Submitted to The Royal Society of Chemistry




70101台南市大學路一號自強校區 TEL:+886-6-2757575 ext. 63600
No.1, University Road, Tainan City, Taiwan FAX:+886-6-2389940
本網站由 航太系電腦室 建置管理登入
Best View: IE7.0 / 1024x768 32-bit color