鄭泗滄 教授 簡介

職稱:國立成功大學航空太空工程研究所兼任教授
電話:886-6-2757575 ext. 63665
傳真:886-6-2083641
實驗室網頁:結構實驗室

學歷

美國加州柏克萊大學機械工程系 博士 1984/01~ 1987/07
美國紐約州大水牛城分校機械航空工程系' 碩士 1982/09~ 1984/01
中華民國國立臺灣大學機械工程系 學士 1976/09~ 1980/06

經歷

現職:
國立成功大學 航太工程系 教授 1995/08至訖今
經歷:
國立成功大學教學卓越教師學會(Academy of Educators, NCKU) 會士 2008/10至訖今
國立成功大學 航太工程系 副教授 1987/08至1995/07
國立科學工藝博物館 諮詢顧問 2003/03至訖今
考試院專門職業及技術人員高等考試 委員 2006, 2008
財團法人車輛研究測試中心 諮詢委員 2005/09至2009/08
財團法人車輛安全審驗中心 諮詢委員 2009/11至2011/10
中華民國尖端材料科技協會 監事 2009/12至訖今
中華民國尖端材料科技協會 理事 1993/08至2009/11
中華民國力學學會 秘書處 副秘書長 1997/02至1999/02
國立成功大學 航太工程系結構組 組長 1993/08至1995/07
國立成功大學 航太工程系電子計算機室 組長 1988/08至1989/07
美加州柏克萊大學 衝擊實驗室 研究助理 1984/01至1987/07
美紐約州大水牛城分校 材料實驗室 教學助理 1982/09至1983/06
國立臺灣工技學院 工管系 研究助理 1978/06至1979/04

專長及研究領域

實驗力學 , 衝擊力學 , 複合材料與力學 , 微機電系統

榮譽及獎勵

1. Member, Pai Tau Sigma Honorary Mechanical Engineering Fraternity, Buffalo, Beta Lambda Chapter, NY, 1983.
2. Visiting Professor, Department of Aeronautics & Astronautics, Stanford University, Stanford, CA, USA, Summer 1988.
3. Visiting Professor, Center for Composite Materials, University of Delaware, Newark, Delaware, USA, Summer, 1989.
4. Winner of the "Best Paper by a SAMPE Member Award" (with F. K. Chang and H. Y. Choi), the 34th International SAMPE Symposium and Exhibition, Reno, CA, 1989.
5. Outstanding Service Certificate for the Consecutive Three-year Contribution in Promoting Aviation and Space Industry in Taiwan, ROC, certificate awarded by the Industrial Development Bureau, Ministry of Economic Affairs, ROC, 1991.
6. Annual Research Award, National Science Council, 1989-1999, 2001-2010.
7. Who's Who in the World , Marquis Who's Who, 1995, 2009, New Providence, NJ.
8. Who's Who in Science and Engineering , Marquis Who's Who, 2000, New Providence, NJ.
9. Education Service Medal , Ministry of Education, 1998, Taiwan, ROC.
10. Winner of the "2002 Best Paper from a SAMPE - Taiwan Chapter Member Award" (with Y. G. Su and Z. H. Luo), the Annual Graduate Student Thesis Contest, TaiChung, Taiwan, ROC.
11. Invited visiting professor, Materials and Manufacturing Directorate, AFRL/PRSM at Edwards AFB, supported under Window on Science (WOS) program, Asian Office of Aerospace Research & Development (AOARD), Air Force, USA, Aug., 2003.
12. Invited visiting professor, Materials Technology Center, Southern Illinois University Carbondale, Carbondale, Illinois 62901, USA, supported under Window on Science (WOS) program, Asian Office of Aerospace Research & Development (AOARD), Air Force, USA, Aug., 2003.
13. 系統與感測專題競賽,複賽第四名,"複材機翼系統的設計與實作"(with張柏雄),教育部顧問室「系統與感測科技人才培育計畫」,Oct. 2005,新竹,台灣,ROC.
14.「 A Student Design Project Named Flying Kite」,教育部顧問室九十四年度「精密機電整合人才培育計畫」,佳作技術論文獎(with苗君易、詹劭勳等)。
15. "Outstanding Service as the SAMPE 2006/Long Beach Technical Program Co-Chair", Certificate awarded at Long Beach, CA, May 03, 2006.
16. Who's Who in Asia , Marquis Who's Who, 1st edition, 2007, New Providence, NJ.
17. 獲選為國立成功大學航太工程學系96學年度"教學特優教師",2008。
18. 成功大學「發展國際一流大學及頂尖研究中心計畫」學術期刊論文發表進步獎,2008。
19. 獲選為國立成功大學96學年度"教學傑出教師",2008。
20. 獲選為國立成功大學教學卓越教師學會,會士 (Fellow, Academy of Educators, NCKU), 2008。
21. Who's Who in the World , Marquis Who's Who, 1995, 2009, New Providence, NJ.
22. Listed in the online database of the Australian, Asia Pacific and Commonwealth Directory of Academics and the 2009 Edition (Print) of The Australian Directory of Academics, Academics International, http://www.academics.edu.au, Address: 9 Temasek Boulevard, Suntec Tower Two, Unit 19-05, Singapore 038989.
23. Advisory Committee Member of The 6th Asian-Pacific Conference on Aerospace Technology and Science (APCATS’2009), Huangshan, China, Nov.15 ~19, 2009.
24. Scientific Committee Member of the 7th Asian-Australasian Conference on Composite Materials, Taipei International Convention Center (TICC), November 15-18, 2010
1. , Hydroplaning Analysis for Tire Rolling over Water Film with Various Thicknesses Using the LS-DYNA Fluid-Structure Interactive Scheme , Computers, Materials & Continua , 2009 (SCI) 摘要
2. , Application of co-sputtered Cu-Ni micro metallic strain gage for structure response monitoring , Journal of Aeronautics , 2009 (SCI) 摘要
3. , Synthesis of Functionalized Carbon Nanotubes/Phenolic Nanocomposites and Its Electrical and Thermal Conductivity Measurements , Japanese Journal of Applied Physics , 2009 (SCI) 摘要
4. , 增溫狀態下SAC405 銲錫合金受1.67x10-4 至1,192 s-1 應變率動態壓縮負載之應力應變關係 , ASE Technology Journal , 2009 (SCI) 摘要
5. , High strain rate compression behavior for lead-free 96.5Sn-3.0Ag-0.5Cu, 98.5Sn-1.0Ag-0.5Cu & Sn63Pb37 eutectic alloys , Microelectronics Reliability , 2009 (SCI)
6. , 96.8Sn-2.6Ag-0.6Cu及98.25Sn-1.2Ag-0.5Cu-0.05Ni-0.002Ge在高應變率下之機械行為 , ASE Technology Journal , 2008 (SCI)
7. , Quasi-static compression and rolling contact analysis of MAXXIS VICTRA MA-Z1 tire on dry roadway , Int. J. Modern Physics, B (IJMPB) , 2008 (SCI)
8. , 增溫狀態下Sn63Pb37、SAC105 及SAC305 銲錫高應變;機械性質研究 , ASE Technology Journal , 2008 (SCI)
9. , Time-domain rotational angle identification of a beam structure using dynamic transverse deflection signals , J. of the Chinese Institute for Engineers (JCIE) , 2008 (SCI) 摘要
10. , High G drop-impact response and failure analysis of a chip packaged printed circuit board , Int. J. Impact Engineering , 2007 (SCI) 摘要
11. , Simulation of a rigid plate hit by a cylindrical hemi-spherical tip-ended soft impactor , Computational Materials Science , 2007 (SCI)
12. , Motion analysis and dynamic response of a wind mill turbine blade , Journal of Aeronautics, Astronautics & Aviation, series B , 2006 (SCI)
13. , Developing a mini-impact system for measuring silicon wafer's elastodynamic response , J. of Mechanics , 2005 (SCI)
14. , Finite element impact model of airport approach lighting towers , Canadian Aeronautics & Space Journal , 2004 (SCI)
15. , Structural properties identification of damaged beam structure using real time signals , Transactions of the Aeronautical & Astronautical Society of the Republic of China (AASRC) , 2004 (SCI)
16. , FEA simulation of airport approach lighting towers , J. Structural Engineering - ASCE , 2004 (SCI)
17. , Impact analysis of airport approach lighting towers with top-mass added , Transactions of the Aeronautical & Astronautical Society of the Republic of China (AASRC) , 2004 (SCI) 摘要
18. , 機場塔架結構體之動態易損性分析 , EEngineering Science & Technology Bulletin, NSC (工程科技通訊),v. 68,p.115-120 (in Chinese) , 2003 (SCI)
19. , 使用微感應器來研究矽基材料之動態衝擊反應 , SAMPE Bulletin, Taiwan Chapter , 2002 (SCI)
20. , Determining the constitutive parameters of a viscoelastic jelly material , Journal of Ching Yun Institute of Technology , 2001 (SCI)
21. , Dynamic strain measurement of composite structures utilizing the embedded fiber optical sensor , J. Chinese Soc. Mech. Eng. , 2000 (SCI)
22. , 應用多模光纖感知系統於智慧型先進複材結構之振動與低速衝擊的量測與分析 , Engineering Science & Technology Bulletin, NSC (?u?{??�??q訊) , 1999 (SCI)
23. , Ballistic impact response of 3-D four-step braided glass/epoxy composites , Key Engineering Materials , 1998 (SCI) 摘要
24. , Ballistic impact response for two-step braided three-dimensional textile composite , AIAA Journal , 1996 (SCI) 摘要
25. , Stiffness degradation of three-dimensional braided textile composites due to quasi-static penetration , J. Chinese Soc. Mech. Eng. , 1995 (SCI)
26. , Characterization of piezo-film sensors for direct vibration and impact measurements , Experimental Mechanics , 1995 (SCI)
27. , Predicting the ballistic limit of plain woven glass/epoxy composite laminates , Int. J. Impact Engineering , 1994 (SCI) 摘要
28. , An experimental and numerical analysis of high strain-rate compressional behaviour of 6061-O aluminum alloys , Computers & Structures , 1994 (SCI)
29. , High strain-rate compressional behaviors of stitched and unstitched GFRP composite laminates with radial constraints , Composite Structures , 1993 (SCI) 摘要
30. , Effect of square cut-outs on the natural frequency and mode shape of cross-ply composite laminates , Composits Science Technology , 1993 (SCI)
31. , An experimental study of the strength degradation of GFRP laminates subject to ballistic normal impact , J. Chinese Soc. Mech. Eng. , 1992 (SCI)
32. , A model for predicting the impact residual strength of GFRP laminates subject to ballistic normal impact , J. Reinforced Plastics Composites , 1992 (SCI)
33. , Transient response of a pultruded fiber reinforced plastic rod subject to impact loading , J. Reinforced Plastics Composites , 1991 (SCI)
34. , 結構振動之非接觸式光學量測與驗証 , Instrument Today , 1991 (SCI)
35. , Characterization of impact damage in laminated composites , SAMPE Journal , 1990 (SCI)
36. , Study on impact damage in laminated composites , Mechanics of Materials , 1990 (SCI)
37. , 結構受撞擊產生之應力波形的量測與應用 , Instrument Today , 1989 (SCI)
38. , Shear and bending phenomena in normal projectile impact on thin targets , Computational Techniques for Impact, Penetration and Perforation of Solids , 1989 (SCI)
39. , Effect of target bending in normal impact of a flat-ended cylindrical projectile near the ballistic limit , Int. J. Solids Structures , 1988 (SCI)
1. [99] 耐衝擊結構開發
中山科學院 (99~99) 中文摘要
2. [99] 纖維強化輻射輪胎於乾濕路面行駛之流固藕合動態數值分析及實驗
國科會 (99~101) 中文摘要
3. [96] 綠色風能葉片之結構分析與輕量化研究(2/2)
國科會 (96.8.1-97.7.31)
4. [95] 綠色風能葉片之結構分析與輕量化研究(1/2)
國科會 (95.8.1-97.7.31) 中文摘要 英文摘要
5. [95] 自由落體式衝擊試驗後緣鋸齒波程式器之力學分析與設計研究
國推會 (95.1.1-95.12.31) 中文摘要 英文摘要
6. [94] 航太結構承受衝擊負載下之動態響應的模擬及分析(2/3)
國科會 (94.4.1-95.3.31)
7. [93] 航太先進結構的時域健康監控之分析及實驗(3/3)
國科會 (93.8.1-94.7.31)
8. [92] 航太結構承受衝擊負載下之動態響應的模擬及分析(1/3)
國科會 (92.8.1-93.7.31)
9. [92] 航太先進結構的時域健康監控之分析及實驗(2/3)
國科會 (92.8.1-93.7.31)
10. [91] 航太先進結構的時域健康監控之分析及實驗(1/3)
國科會 (91.8.1-92.7.31)
11. [90] 機場塔架結構體之動態易損性分析(2/2)
國科會 (90.8.1-91.7.31)
1) Jenq, S. T., W. Goldsmith and J. Kelly, 1988, "Effect of target bending in normal impact of a flat-ended cylindrical projectile near the ballistic limit", Int. J. Solids Structures, v. 24, pp. 1243-1266. (SCI, EI)
2) Jenq, S. T. and W. Goldsmith, 1989, "Shear and bending phenomena in normal projectile impact on thin targets", in Computational Techniques for Impact, Penetration and Perforation of Solids, (edited by L. E. Schwer, et al.), ASME, AMD, v. 103, pp. 223-233, New York.
3) 鄭泗滄,范政文,許龍池,1989,"結構受撞擊產生之應力波形的量測與應用",Instrument Today,v. 11,pp. 77 - 81. (in Chinese)
4) Chang, F. K., H. Y. Choi, and S. T. Jenq, 1990, "Characterization of impact damage in laminated composites", SAMPE Journal, v. 26, pp. 18-26. (SCI, EI)
5) Chang, Fu-Kuo, Hyung Yun Choi and Syh-Tsang Jeng, 1990, “Study on impact damage in laminated composites,” Mechanics of Materials, v. 10(1-2), pp. 83-95, 1990. (SCI. EI)
6) Jenq, S. T. and J. W. Fan, 1991, "Transient response of a pultruded fiber reinforced plastic rod subject to impact loading", J. Reinforced Plastics Composites, v. 10, pp. 212-220. (SCI, EI)
7) 鄭泗滄,張之光,許龍池,1991,"結構振動之非接觸式光學量測與驗証",Instrument Today,v. 12,pp. 56 - 61. (in Chinese)
8) Jenq, S. T., S. M. Yang, and J. D. Wu, 1992, "An experimental study of the strength degradation of GFRP laminates subject to ballistic normal impact", J. Chinese Soc. Mech. Eng., v. 13, pp. 1-9. (EI)
9) Jenq, S. T., S. B. Wang, and L. C. Sheu, 1992, "A model for predicting the impact residual strength of GFRP laminates subject to ballistic normal impact", J. Reinforced Plastics Composites, v. 11, 1127-1141. (SCI, EI)
10) Jenq, S. T., G. C. Hwang, and S. M. Yang, 1993, "Effect of square cut-outs on the natural frequency and mode shape of cross-ply composite laminates", Composits Science Technology, v. 47, pp. 91-101. (SCI, EI)
11) Jenq, S. T. and S. L. Sheu, 1993, "High strain-rate compressional behaviors of stitched and unstitched GFRP composite laminates with radial constraints", Composite Structures, v. 25, pp. 427-438. (SCI, EI)
12) Jenq, S. T., H. S. Jing, and Charles Chung, 1994, “Predicting the ballistic limit of plain woven glass/epoxy composite laminates”, Int. J. Impact Engineering, v. 15(4), pp. 451-464. (SCI, EI)
13) Jenq, S. T. and S. L. Sheu, 1994, “An experimental and numerical analysis of high strain-rate compressional behaviour of 6061-O aluminum alloys”, Computers & Structures, v. 52(1), pp. 27-34. (SCI, EI)
14) Jenq, S. T. and C. K. Chang, 1995, "Characterization of piezo-film sensors for direct vibration and impact measurements", Experimental Mechanics, v. 35(3), pp. 224-232. (SCI, EI)
15) Jenq, S. T. and J. J. Mo, 1995, “Stiffness degradation of three-dimensional braided textile composites due to quasi-static penetration”, J. Chinese Soc. Mech. Eng., v. 16(5), pp. 477-488. (EI)
16) Jenq, S. T. and J. J. Mo, 1996, “Ballistic impact response for two-step braided three-dimensional textile composite”, AIAA Journal, v. 34(2), pp. 375-384. (SCI, EI)
17) Jenq, S. T., J. T. Kuo and L. T. Sheu, 1998, “Ballistic impact response of 3-D four-step braided glass/epoxy composites”, Key Engineering Materials, v. 141-143, in Part 1: Impact Response and Dynamic Failure of Composites and Laminate Materials, pp. 349-366. (SCI, EI)
18) 鄭泗滄,1999,“應用多模光纖感知系統於智慧型先進複材結構之振動與低速衝擊的量測與分析“,Engineering Science & Technology Bulletin, NSC (工程科技通訊),v. 35,pp. 28-32。(in Chinese)
19) Jenq, S. T. and H. B. Lin, 2000, “Dynamic strain measurement of composite structures utilizing the embedded fiber optical sensor”, J. Chinese Soc. Mech. Eng., v. 21(5), pp. 473-482. (EI)
20) Lo, H. S., H. Y. Liu and S. T. Jenq, 2001, “Determining the constitutive parameters of a viscoelastic jelly material”, Journal of Ching Yun Institute of Technology (清雲學報), v. 21(1), pp. 85-104.
21) Y. G. Su, S. T. Jenq and Z. H. Luo, 2002, “使用微感應器來研究矽基材料之動態衝擊反應”, SAMPE Bulletin, Taiwan Chapter (中華民國尖端材料協會會訊), v. 23, pp. 18-27。(2002 Best paper award, Graduate Student Paper Competition, SAMPE, Taiwan Chapter) (in Chinese)
22) 鄭泗滄、蕭飛賓,“機場塔架結構體之動態易損性分析”,2003,Engineering Science & Technology Bulletin, NSC (工程科技通訊),v. 68,p.115-120 (in Chinese)。
23) 鄭泗滄,“新紀元的微型飛具”,科學月刊 (Science Monthly),2003, v. 34(10),pp. 842-845 (in Chinese)。
24) D. G. Zimcik, M. Nejad Ensan, S. T. Jenq and M. C. Chao, 2004, “FEA simulation of airport approach lighting towers”, J. Structural Engineering - ASCE, v. 130(5), pp. 805-811. (SCI, EI)
25) S. T. Jenq, F. B. Hsiao, M. C. Chao, D. G. Zimcik and M. Nejad Ensan, 2004, “Impact analysis of airport approach lighting towers with top-mass added”, Transactions of the Aeronautical & Astronautical Society of the Republic of China (AASRC), v. 36(1), pp. 7-19. (EI)
26) M. Nejad Ensan, D. G. Zimcik, S. T. Jenq and F. B. Hsiao, 2004, “Finite element impact model of airport approach lighting towers”, Canadian Aeronautics & Space Journal, v. 50(2), pp. 125-133. (EI)
27) C. H. Chao, S. T. Jenq and P. S. Hsu, 2004, “Structural properties identification of damaged beam structure using real time signals”, Transactions of the Aeronautical & Astronautical Society of the Republic of China (AASRC), v. 36(3), pp. 259-268. (EI)
28) S. T. Jenq, T. S. Leu, Y. G. Su, J. S. Lee and G. C. Hwang, 2005, “Developing a mini-impact system for measuring silicon wafer's elastodynamic response,” J. of Mechanics, v. 21(1), pp. 33-39. (SCI, EI)
29) S. T. Jenq, F. M. Yu, P. Y. Hsu and C. L. Ong, 2006,”Motion analysis and dynamic response of a wind mill turbine blade,”, Journal of Aeronautics, Astronautics & Aviation, series B, v. 38(2), pp. 79-88. (EI)
30) S. T. Jenq, H. S. Sheu, Chang-Lin Yeh, Yi-Shao Lai, Jenq-Dah Wu, 2007,“High G drop-impact response and failure analysis of a chip packaged printed circuit board”, Int. J. Impact Engineering, v. 34(10), pp. 1665-1667. (SCI, EI)
31) S. T. Jenq, F. B. Hsiao, I. C. Lin, D. G. Zimcik and M. Nejad Ensan, 2007,“Simulation of a rigid plate hit by a cylindrical hemi-spherical tip-ended soft impactor," Computational Materials Science, v. 39(3), pp. 518-526. (SCI, EI)
32) Syh-Tsang Jenq, Chih-Hang Chao, Yih-Nan Jeng and En-Cheng Liu, 2008, “Time-domain rotational angle identification of a beam structure using dynamic transverse deflection signals”, J. of the Chinese Institute for Engineers (JCIE), v. 31(2), pp.279-290. (SCI, EI)
33) 鄭泗滄、林仁傑、張烜琥,2008,”96.8Sn-2.6Ag-0.6Cu及98.25Sn-1.2Ag-0.5Cu-0.05Ni-0.002Ge在高應變率下之機械行為”,ASE Technology Journal, v. 1(1), pp. 39-47. (published by the Corporate R&D Center, Advanced Semiconductor Engineering, Inc., Kaohsiung, Taiwan, ISSN 1999-1827) (in Chinese)
34) S. T. Jenq, Yuchen Ting, S. M. Liang, David Lin and Mike Shih, 2008, “Quasi-static compression and rolling contact analysis of MAXXIS VICTRA MA-Z1 tire on dry roadway," Int. J. Modern Physics, B (IJMPB), v. 22(9/11), pp.1531-1537. (SCI)
35) 鄭泗滄、林仁傑、邱元升,2008,”增溫狀態下Sn63Pb37、SAC105 及SAC305 銲錫高應變率機械性質研究”,ASE Technology Journal, v. 1(2), pp. 170-178. (published by the Corporate R&D Center, Advanced Semiconductor Engineering, Inc., Kaohsiung, Taiwan, ISSN 1999-1827) (in Chinese)
36) Syh-Tsang Jenq, Hsuan-Hu Chang, Yi-Shao Lai and Tsung-Yueh Tsai, 2009, “High strain rate compression behavior for lead-free 96.5Sn-3.0Ag-0.5Cu, 98.5Sn-1.0Ag-0.5Cu & Sn63Pb37 eutectic alloys," Microelectronics Reliability, v. 49(3), pp. 310-317. (SCI, EI)
37) Syh-Tsang Jenq, Yi-Sih Wang, Jyh-Ming Tin, Hong-Seng Lo, Hong-Tsu Young, Li-Chang Chuang and Hon-Bin Lin, 2009, “Application of co-sputtered Cu-Ni micro metallic strain gage for structure response monitoring,” Journal of Aeronautics, Astronautics & Aviation, A, v. 41(2), pp. 103-110. (EI)
38) Chie Gau, Shuo-Ying Chen, Hsin-Luen Tsai1, Syh-Tsang Jenq, Cheng-Ching Lee, Yu-Der Chen, and Ting-Hua Chien, 2009, “Synthesis of Functionalized Carbon Nanotubes/Phenolic Nanocomposites and Its Electrical and Thermal Conductivity Measurements,” Japanese Journal of Applied Physics (JJAP), v. 48(6), pp. 06FF10-1-06FF 10-4. (SCI)
39) 鄭泗滄、林仁傑、邱元升,2009,”增溫狀態下SAC405 銲錫合金受1.67x10-4 至1,192 s-1 應變率動態壓縮負載之應力應變關係,” ASE Technology Journal, v. 2(2), pp. 163-167. Published by the Corporate R&D Center, Advanced Semiconductor Engineering, Inc., Kaohsiung, Taiwan, ISSN 1999-1827. (in Chinese)
40) Syh-Tsang Jenq and Yuen-Sheng Chiu, 2009, “Hydroplaning Analysis for Tire Rolling over Water Film with Various Thicknesses Using the LS-DYNA Fluid-Structure Interactive Scheme,” Computers, Materials & Continua (CMC), v. 11(1), pp. 33-58. (SCI, EI)
41) Shao-Tai Lu, Syh-Tsang Jenq, Chieh Kung, Jyh-Ching Juang, and Jiun-Jih Miau, "Dynamic Structural Response Estimation of a Micro-satellite Printed Circuit Board Subjected to a Half-Sine Impact/Shock Loading," submitted to Journal of Aeronautics, Astronautics & Aviation, 2011. (EI)
42) Syh-Tsang Jenq, Ren-Jey Lin, Yueng-Seng Chiu, Yi-Shao Lai and Tsung-Yueh Tsai,“High strain rate constitutive relationship for lead-free Sn–1Ag–0.5Cu, Sn–3Ag–0.5Cu alloys & Sn63Pb37 eutectic alloys under ambient & elevated temperature environment,” to be submitted to Microelectronics Reliability, 2011. (SCI, EI)
70101台南市大學路一號自強校區 TEL:+886-6-2757575 ext. 63600
No.1, University Road, Tainan City, Taiwan FAX:+886-6-2389940
本網站由 航太系電腦室 建置管理登入
Best View: IE7.0 / 1024x768 32-bit color