夏育群 教授 簡介

職稱:國立成功大學航空太空工程研究所教授
辦公室:5855
傳真:06-2389940
實驗室網頁:

學歷

美國愛荷華卅立大學航太暨工程力學研究所 博士 1992年01月~ 1996年08月
美國愛荷華卅立大學航太暨工程力學研究所 碩士 1988年08月~ 1991年12月
國立成功大學航空太空工程學系 學士 1982年09月~ 1986年06月

專長及研究領域

計算力學 , 邊界元數值計算法 , 破壞力學 , 電腦輔助設計與分析
1. Y. C. Shiah and C. L. Tan , An Exact Boundary Integral Equation Formulation for BEM Thermoelastic Analysis of Transversely Anisotropic Solids , Structural Longevity , 2013 , vol.8 , pp.65-73 (SCI) 摘要
2. C.L. Tan, Y.C. Shiah, C.Y. Wang , Boundary Element Elastic Stress Analysis of 3D Generally Anisotropic Solids Using Fundamental Solutions Based on Fourier Series , International Journal of Solids and Structures , 2013 , Vols.50 , pp.2701-2711 (SCI) 摘要
3. Y.C.Shiah and C.L. Tan , Efficient BEM Stress Analysis of 3D Generally Anisotropic Elastic Solids With Stress Concentrations and Cracks , Advances in Boundary Element Techniques XIIII , 2013 (SCI) 摘要
4. R.B. Yang, Y.M. Lee, Y.C. Shiah, T.W. Tsai , On the Generalized Self-Consistent Model for the Effective Thermal Conductivity of Composites Reinforced by Multi-layered Orthotropic Fibers , International Communications in Heat and Mass Transfer , 2013 (SCI) 摘要
5. Y.C. Shiah, Y.M. Lee, and Chi-Chang Wang , BEM Analysis of 3D Heat Conduction in 3D Thin Anisotropic Media , Computers, Materials & Continua , 2013 , vol.33 , pp.229-255 (SCI) 摘要
6. T.W. Tsai, Y.M. Lee, and Y.C. Shiah , Heat Conduction Analysis in an Anisotropic Thin Film Irritated by an Ultrafast Pulse Laser Heating , Numerical Heat Transfer, Part A , 2013 , 64 , pp132–152 (SCI) 摘要
7. Y.C. Shiah, C. L. Tan, C.Y. Wang , An Improved Numerical Evaluation Scheme of the Fundamental Solution and its Derivatives for 3D Anisotropic Elasticity Based on Fourier Series , CMES-Computer Modeling in Engineering & Sciences , 2012 , Vol. 87, No. 1 , pp. 1-22 (SCI) 摘要
8. M.R. Hematiyan, A. Khosravifard, Y.C. Shiah, and C.L. Tan , Identification of Material Parameters of Two-Dimensional Anisotropic Bodies Using an Inverse Multi-Loading Boundary Element Technique , CMES-Computer Modeling in Engineering & Sciences , 2012 , Vol. 87, No. 1 , pp. 55-76 (SCI) 摘要
9. Yu Tsai, Y.C. Shiah, Jin H. Huang , Effects of Porous Materials in an Insert Earphone on its Frequency Response- Experiments & Simulations , IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control , 2012 , vol.15, No.11 , pp.2537-2547 (SCI) 摘要
10. Chun Chang, Chi-Chang Wang, Y.C. Shiah, and Jin H. Huang , Numerical and Experimental Analysis of Harmonic Distortion in a Moving-Coil Loudspeaker , Communications in Nonlinear Science and Numerical Simulation , 2012 (SCI) 摘要
11. Y.M. Lee, T.W. Tsai, Y.C. Shiah , Transient Heat Conduction across Thermal Barrier Coating on an Anisotropic Substrate , Engineering Computations , 2012 (SCI) 摘要
12. Y.C. Shiah, C.L. Tan, and C.Y. Wang , Efficient Computation of the Green’s Function and its Derivatives for Three-Dimensional Anisotropic Elasticity in BEM Analysis , Engineering Analysis with Boundary Elements , 2012 , Vol.36 , pp1746-1755 (SCI) 摘要
13. Y.C. Shiah, M.R. Hematiyan, and Y.H. Chen , Regularization of the Boundary integrals in the BEM Analysis of 3D Potential Problems , Journal of Mechanics , 2012 (SCI) 摘要
14. Y.C. Shiah and C. L. Tan , Boundary Element Method for Thermoelastic Analysis of Three-dimensional Transversely Isotropic Solids , International Journal of Solids and Structures , 2012 , Vol.49 , pp.2924-2933 (SCI) 摘要
15. Chun Chang, S.J. Pawar, Soar Weng, Y.C. Shiah, and Jin H. Huang , Effect of Nonlinear Stiffness on the Total Harmonic Distorsion and Sound Pressure Level of a Circular Miniature Loudspeaker- Experiments and Simulations , IEEE Transactions on Consumer Electronics , 2012 , Vol.58, No.2 , pp212-219 (SCI) 摘要
16. Y.C. Shiah and C.L. Tan , Higher-Order Green's Function Derivatives and BEM Evaluation of Stresses at Interior Points in a 3D Generally Anisotropic Solid , CMES-Computer Modeling in Engineering and Sciences , 2011 , Vol. 78 , P.95-108 (SCI) 摘要
17. Yung-Sen Lin, Po-Wen Chen, Di-Juin Lin, Pei-Ying Chuang, Tsung-Hsien Tsai, Yui-Chuin Shiah, Yuen-Chung Yu , Electrochromic performance of reactive plasma-sputtered NiOx thin films on flexible PET/ITO substrates for flexible electrochromic devices , Surface and Coatings Technology , 2010 , Vol. 205 , P.216-P.221 (SCI) 摘要
18. Y.C. Shiah, C.L. Tan, and R.F. Lee , Internal Point Solutions for Displacements and Stresses in 3D Anisotropic Elastic Solids Using the Boundary Element Method , CMES-Computer Modeling in Enginnering and Sciences , 2010 , Vol. 69, No.2 , P.167-P.198 (SCI)
19. Derek Kuo, Y. C. Shiah, Jin H. Huang , Modal Analysis of a Loudspeaker and its Associated Acoustic Pressure Field , Journal of Vibration and Acoustics-Tractions of the ASME , 2010 , Vol. 133 , P.031015-1 - P.031015-11 (SCI)
20. Y.C. Shiah, Wei-Xiang Sun , On the Efficiency of Computing 3D Fundamental Solutions of Anisotropic, Transversely Isotropic, and Isotropic Bodies in BEM , Journal of Mechanics , 2010 , Vol.26, No.4 , P.483-P.491 (SCI)
21. Y.C.Shiah, Jin H. Huang, Yu-Long Xue , The First Damped frequency with Maximum Sound Pressure of a Miniature Loudspeaker for Cellular Phones , Journal of Mechanics , 2010 , Vol. 26, No.4 , P.473-P.482 (SCI)
22. Y.C. Shiah, Wen-Sheng Hwang, and Guan-Chyun Shiah , BEM Stress Analysis for Thin Multilayered Composites Subjected to Inertial Loads , Journal of Composite Materials , 2009 , Vol. 43, No. 4 , pp.349-366 (SCI)
23. C. L. Tan, Y.C. Shiah,C.W. Lin , Stress Analysis of 3D Generally Anisotropic Elastic Solids Using the Boundary Element Method , CMES-Computer Modeling in Engineering and Sciences , 2009 , Vol. 41, No.3 , pp.159-214 (SCI)
24. Shaw-Jyh Shin, Chen-Hung Huang, and Y.C. Shiah , Study of the Underfill Effect on the Thermal Fatigue Life of WLCSP- Experiments and Finite Element Simulations , CMES-Computer Modeling in Engineering and Sciences , 2009 , Vol. 40, No.1 , pp.83-103 (SCI)
25. Y.C. Shiah, C.L. Tan, V.G. Lee , Evaluation of Explicit-form Fundamental Solutions for Displacements and Stresses in 3D Anisotropic Elastic Solids , CMES-Computer Modeling in Engineering & Sciences , 2008 , Vol. 34, No. 3 , pp. 205-226 (SCI)
26. J.H. Huang, Y.C. Shiah, and Bing Jean Lee , Electromechanical responses of a long piezoelectric tube subjected to dynamic loading , Journal of Physics D- Applied Physics , 2008 , Vol. 41 , pp.41-49 (SCI)
27. Y.C. Shiah, Hong-Ching Her, Jin H. Huang, and Brant Huang , Parametric analysis for a miniature loudspeaker used in cellular phones , Journal of Applied Physics , 2008 , Vol.104 , 104905 (SCI)
28. Y.C. Shiah, B.J. Lee , Heat Conduction of Thin Anisotropic Composites Subjected to Convection , International Communications in Heat and Mass Transfer , 2008 , Vol. 35, Issue 5 , pp.565-570 (SCI)
29. Y.C. Shiah, Yung-Sen Lin, Y.H. Chen , Analysis for Thermal Conductance Effect on the Interfacial Thermal Stresses of Anisotropic Composites , Journal of Thermal Stresses , 2008 , Vol. 31, Issue 10 , pp. 991-1005 (SCI)
30. Jin H. Huang, Hong-Ching Her, Y. C. Shiah, Shaw-Jyh Shin , Electroacoustic simulation and experiment on a miniature loudspeaker for cellular phones , Journal of Applied Physics , 2008 , Vol. 103, issue3 , 033502 (SCI)
31. Y.C. Shiah, Y.H. Chen , BEM Analysis of Interior Thermal Stresses near the Boundary of Anisotropic Materials , Journal of Thermal Stresses , 2007 , Vol. 30 , pp.755-777 (SCI)
32. Y.C. Shiah, Y.H. Chen, and W.S. Kuo , Analysis for the Interlaminar Stresses of Thin Layered Composites subjected to Thermal Loads , Composites Science and Technology , 2007 , Vol. 67 , pp 2485-2492 (SCI)
33. Jin H. Huang, Jhao-Ming Chen, and Y. C. Shiah , Electromechanical Analysis of a Piezoelectric Beam Used to Drive a Torsional Microactuator , Journal of Intelligent Material Systems and Structures , 2007 , Vol. 18, No. 6 , pp. 527-634 (SCI)
34. Y.C. Shiah, Yi-Shiau Shih , Regularization of Nearly Singular Integrals in the Boundary Element Analysis for Interior Anisotropic Thermal Field near the Boundary , Journal of the Chinese Institute of Engineers , 2007 , Vol. 30, No. 2 , pp. 219-230 (SCI)
35. Y.C. Shiah, Y.C. Lin, and C.L. Tan , Boundary Element Stress Analysis of Thin Layered Anisotropic Bodies , CMES-Computer Modeling in Engineering and Sciences , 2006 , Vol. 1, No. 1 , pp. 11-22 (SCI)
36. Y.C. Shiah, Chien-Hsin Huang, and Jin H. Huang , Electromechanical responses of optical fibers with piezoelectric coatings , Journal of the Chinese Institute of Engineers , 2006 , Vol. 29, No. 5 , pp. 893-902 (SCI)
37. Kuo, W. S., Ko, T. H., and Yui-Chuin Shiah , Compressive Damage in Three-Axis Woven Thermoplastic Composites , Journal of Thermoplastic Composite Materials , 2006 , vol.19 , pp.357-373 (SCI)
38. Y.C. Shiah , Yi-Xiao Shi , Anisotropic Heat Conduction across an Interface Crack/Defect Filled with a Thin Interstitial Medium , Engineering Analysis with Boundary Elements , 2006 , Vol. 30, No. 5 , pp. 325-337 (SCI)
39. Y. C. Shiah, Yi-Xiao Shi , Heat Conduction across Thermal Barrier Coatings of Anisotropic Substrates , International Communications in Heat and Mass Transfer , 2006 , Vol. 33 , pp. 827-835 (SCI)
40. Y.C. Shiah, Po-Wen Huang, Ruey-Bin Yang , Heat Conduction in Multiply Adjoined Anisotropic Media With Embedded Point Heat Sources , JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME , 2006 , Vol. 128 , pp. 207-214 (SCI)
41. Y.C. Shiah, Chien-Hsin Huang, and Jin H. Huang , Static Electromechanical Response of Piezoelectric Tubes as Sensors and Actuators , Journal of Intelligent Material Systems and Structures , 2006 , vol.17, Issue 2 , pp.133-144 (SCI)
42. Y.C. Shiah, T.L. Guao, C.L. Tan , Two-Dimensional BEM Thermoelasticity Analysis of Anisotropic Media with Concentrated Heat Sources , CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES , 2005 , Vol. 7, No. 3 , pp. 321-338 (SCI)
43. Y.C. Shiah, Y.J. Lin , BEM's Inter-Coupled Treatment of the Interfacial Thermal Stresses between Dissimilar Anisotropic Materials , AIAA Journal , 2005 , vol.43, no.5 , pp.103-114 (SCI)
44. Y.C. Shiah, Jin H. Huang , BEM's Interior Stress/Strain Analysis for 2D Static Thermoelasticity Involving Non-Uniform Volume Heat Sources , Journal of Thermal Stresses , 2005 , vol.28 , P.363-P.390 (SCI)
45. Y.C. Shiah, Liang Tseng, Jui Che Hsu, and Jin H. Huang , Experimental Characterization of an Integrated Sandwich Composite Using 3D Woven Fabrics as the Core Material , Journal of Thermoplastic Composite Materials , 2004 , Vol. 17 , pp. 229-243 (SCI)
46. Y.C. Shiah, Ruey-Bin Yang, and Po-Wen Hwang , Heat Conduction in Dissimilar Anisotropic Media with Bonding Defects/Interface CracksJournal of Mechanics , Journal of Mechanics , 2004 , vol.21, No.1 , pp.15-23 (SCI)
47. Y.C. Shiah, Y.J. Lin , An Infinitely Large Plate Weakened by a Circular-Arc Crack Subjected to Partially Distributed Loads , Journal of Engineering Mathematics , 2004 , Vol. 49, No. 1 , pp. 1-18 (SCI)
48. Y.C. Shiah, C.L. Tan , BEM Treatment of Three Dimensional Anisotropic Field Problems by Direct Domain Mapping , Engineering Analysis with Boundary Elements , 2004 , Volume 28, Issue 1 , pp. 43-52 (SCI)
49. Y.C. Shiah, Y.J. Lin , Multiple reciprocity boundary element analysis of two-dimensional anisotropic thermoelasticity involving an internal arbitrary non-uniform Volume Heat Source , International Journal of Solids and Structures , 2003 , Vol. 40, Issue 24 , pp. 6593-6612 (SCI)
50. Y.C. Shiah and Jin H. Huang , Characterization of the Effective Elastic Moduli of an Integrated Sandwich Composite , Journal of Composite Materials , 2003 , Vol. 37, No. 13 , pp.1131-1147 (SCI)
51. Y.C. Shiah, H.Y. Yeh, and Jin H. Huang , Time-Dependent Interfacial Residual Shear in a Dual-Coated Optical Fiber Induced by Axial Traction , Advanced Composites Letters , 2003 , Vol. 12, No. 4 , pp. 133-140 (SCI)
52. Y.C. Shiah, C.Y. Lin , Anisotropic Heat Conduction Involving Internal Arbitrary Volume Heat Generation Rate , International Communications in Heat and Mass Transfer , 2002 , Vol. 29, No. 8 , pp. 1079-1088 (SCI)
53. Y.C. Shiah, Jiunn Fang, Chin-Yi Wei, and Y. C. Liang , In-Plane Bending Fracture of a Large Beam Containing a Circular-Arc CrackJournal of Mechanics , Journal of Mechanics , 2002 , Vol. 18, No. 3 , pp. 145-151 (SCI)
54. Y.C. Shiah , Transverse Flexural Fracture of a Plate Containing an Arc Crackrnal of Mechanics , Journal of the Chinese Institute of Engineers , 2002 (SCI)
55. Y.C. Shiah and C. L. Tan , Determination of Interior Point Stresses in Two Dimensional BEM Thermoelastic Analysis of Anisotropic Bodies , International Journal of Solids and Structures , 2000 , Vol. 37 , pp. 809-829 (SCI)
56. Y.C. Shiah and C. L. Tan , Fracture Mechanics Analysis in 2-D Anisotropic Thermoelasticity Using BEM , CMES-Computer Modeling in Engineering and Science , 2000 (SCI)
57. Y.C. Shiah and C. L. Tan , Exact Boundary Integral Transformation of the Thermoelastic Domain Integral in BEM for General 2D Anisotropic Elasticity , Computational Mechanics , 1999 , Vol. 23 , pp. 87-96 (SCI)
58. Y.C. Shiah and C. L. Tan , Calculation of Interior Point Stresses in Two-dimensional Boundary Element Analysis of Anisotropic Bodies with Body Forces , Journal of Strain Analysis for Engineering Design , 1999 , Vol. 34 , pp.117-128 (SCI)
59. Y.C. Shiah and C.L. Tan , BEM Treatment of Two-dimensional anisotropic field problems by direct domain mapping , Engineering Analysis with Boundary Elements , 1997 , Vol. 20 , pp. 347-351 (SCI)
60. Y.C. Shiah1, Y.M. Lee2, and T.C. Huang2 , A Novel Approach to Identify the Thermal Conductivities of a Thin Anisotropic Medium by the Boundary Element Method , 104 (SCI)
61. R.B. Yang, Y.M. Lee, Y.C. Shiah, T.W. Tsai , On the Generalized Self-Consistent Model for the Effective Thermal Conductivity of Composites Reinforced by Multi-layered Orthotropic Fibers , International Communications in Heat and Mass Transfer (SCI)
1. [103] 邊界元素法分析絕熱塗層系統之暫態熱彈破壞研究
科技部 (2013/08/01 至 2016/07/31) 中文摘要 英文摘要
2. [103] 真實環境下變速型水平軸式風力機之動態模擬系統開發與驗證
科技部 (2013/08/01 至 2015/07/31)
3. [102] 巨觀至微觀異向性熱傳導之有限差分法與邊界元素法分析
科技部 (2012/08/01 至 2013/07/31)
4. [102] 微水力發電技術與經濟之研究
科技部 (2012/08/01 至 2015/07/31)
5. [100] 三維邊界元素法分析多重絕熱塗層之熱破壞及其應用CAE軟件之發展
(2010/08/01 至 2013/07/31)
6. [99] 八輪甲車車體結構殘留應力研究-降低殘留應力之結構加工法研究
逢甲大學航太與系統工程學系 (2010.01.01 至 2010.12.31)
7. [96] 三維異向體熱彈力學之邊界元素法工程分析及其套裝分析軟件之開發
逢甲大學航太與系統工程學系 (2007.08.01 至 2010.07.31)
8. [95] 不同薄型異向基材接合之機件在慣性力下層間應力之邊界元素法分析
逢甲大學航太與系統工程學系 (2006.08.01 至 2007.07.31)
9. [94] 邊界元素法分析多種含薄型異向材料結合之熱脫層
逢甲大學航太與系統工程學系 (2005.08.01 至 2006.07.31)
10. [94] 開發GSM/GPRS 移動式端末機及Ultra Wide Band (UWB) 無線傳輸設備的可靠度實驗與電腦模擬分析
逢甲大學航太與系統工程學系 (2005.11.01 至 2006.10.31)
11. [93] 邊界元素法探討絕熱塗層厚度及異向基材物性對熱機件絕熱塗層脫層之影響
逢甲大學航太與系統工程學系 (2004.08.01 至 2005.07.31)
12. [92] 邊界元對異向性複材受恣意熱源之固熱耦合最佳化分析
逢甲大學航太與系統工程學系 (2003.08.01 至 2004.07.31)
13. [91] 受IC晶片誘導熱應力之異向性電路板最佳化改良設計之實驗與邊界元分析
逢甲大學航太與系統工程學系 (2002.08.01 至 2003.07.31)
70101台南市大學路一號自強校區 TEL:+886-6-2757575 ext. 63600
No.1, University Road, Tainan City, Taiwan FAX:+886-6-2389940
本網站由 航太系電腦室 建置管理登入
Best View: IE7.0 / 1024x768 32-bit color